Description
HMD CrestMax 5G
A 64 MP and ultra-wide dual camera for group shots. A 50 MP front camera for stunning selfies.
In a nutshell
-
Selfies
Level up your selfie.
50 MP selfie camera.
-
Rear camera
Fit the whole crew in.
Ultra-wide rear camera lens.
-
Display
Admire your shots.
6.67” OLED display.
-
Design
Frosted glass.
Matte finish.
Show off your world
Share your best selfies and wide-angle group shots with fast 5G.²
Camera features
-
Skin-tone optimization
Look like yourself.
Auto-optimizer for various skin tones.
-
Rear camera
Scenery and group photos.
The ultra-wide lens gets it all in.
-
Selfie gestures
Say goodbye to selfie stick, say hi to
selfie gestures.
-
Slow-motion selfies
Show all your nuances with
slow-motion selfies.
¹ Battery has limited recharge cycles and battery capacity reduces over time. Eventually the battery may need to be replaced.
² Battery has been tested by HMD Global to maintain at least 80% of its original capacity after 800 full charging cycles.
³ 5G coverage is limited and might not be supported by your network service provider. Actual speed depends on network and other factors.
HMD Crest Max 5G
Mobile device
Weight: 205 grams (including battery)
Dimensions: Height 163.63mm x Width 76.52 mm x Thickness 8.41 mm
Volume: 105.30cc (cm3)
Package
Weight¹(Net): 131.1g(exclude charger and USB cable）
Dimensions: Length 182mm x Width 90mm x Height 41 mm
Volume: 671.58 (cm3)
Material: 157g coated paper+ 1.6~1.65mm grey board single side white
Environmental Features
Materials and substances
- Free of brominated and chlorinated compounds and antimony trioxide, as defined in HMD Substance List 2023
- Free of PVC
- Free of nickel on the product surface
Packaging
- Made of renewable material
- Contains up to 79% recycled material
- Packaging is 100% recyclable
- Minimized package
Recycling
- All materials of the device can be recovered as materials and energy, and the recoverability rate of device material is up to 75.6%.
User guide
- 2 colors
Energy efficiency
- Unplug Charger Reminder
- Charger fulfill EU VI standard
Materials used
Through careful material selection we aim to reduce the environmental impact of our products. The chart below shows the estimated proportions of the materials used to create this mobile device.
- Metals: E.g. stainless steel, copper, zinc, aluminium. Our products contain ~0.1-0.2% precious metals.
- Ceramic materials: Glass, other ceramics.
- Plastics: E.g. ABS/PC, PET, PA, epoxy.
- Battery: E.g. lithium cobalt compound, graphite, aluminium, copper.
- Other: Non-metals such as silicon. Other materials such as glues.
- Metals: 23%
- Ceramic materials: 20%
- Plastics: 24.%
- Battery: 32.%
- Other: 1%
Restricted Substances
We proactively manage and keep track of all the substances in our products, not just those that raise concerns. We have strict requirements for substances that are not allowed in our products.
This product fully complies with all relevant global regulations, for example:
- The EU RoHS Directive 2011/65/EU
- “Management Methods on the Prevention and Control of Pollution caused by Electronic Information Products” commonly known as “China RoHS”
- European REACH Regulation 1907/2006/EC
- The Montreal Protocol on Substances That Deplete the Ozone Layer
Additionally, we have voluntarily restricted the use of many other harmful substances, and called attention to substances such as skin sensitizers and substances that might cause harm to the environment or to the user during the lifecycle of the product.
Some details of such substances for this product are listed below:
- The surface of this device is nickel-free
- This product does not contain Brominated or Chlorinated compounds or Antimony trioxide as specified in HMD Substance List 2023
- Polyvinylchloride (PVC) is not used in this product or its packaging
Energy Consumption ²
The supplied battery complies with the EU Battery Directive 2013/56/EU and does not contain cadmium, lead, or mercury in concentrations higher than those defined in the directive.
Commission Regulation (EC) 2019/1782 for External power Supplies.
Call (GSM): 353 mW
Idle mode (DS): 27 mW
Idle mode: 22 mW
Battery capacity: HBA5033AA-Ganfeng 5000 mAh, B0194A-Highpower 5000m mAh
Battery weight: 66 grams
Charger:
Manufacturer/Producer: BJD
Model: HAD-020E-EU, HAD-020X-UK
Input voltage: 100-240 V
Input AC Frequency: 50/60 Hz
Output voltage: 12 V
Output current: 3 A
Output power: 20 W
Average active efficiency: 81.38 %
Efficiency at lowload (10 %): 75 %
Charger no-load power consumption: 0.1 W
Charger weight: 57-EU grams, 63.06-UK grams
Packaging
We work to minimize the environmental impact of our packaging by selecting sustainable materials, reducing the packaging size, reducing the volume of material we use, and considering what happens to the package when it is no longer needed.
Our packaging contains no hazardous or restricted substances and is fully compliant with the EU directive 2013/2/EU.
Recycling
Always return your used electronic products, batteries, and packaging materials to a dedicated recycling collection point. This way you help prevent uncontrolled waste disposal and promote the recycling of materials.
- All mechanical parts as well as packaging materials have been marked where practically possible.iPlastic parts are marked in accordance with ISO 11469 and ISO 1043-1 to -4 standards.
- This product and its battery have been marked with the crossed-over wastebasket symbol (WEEE Directive) to signify that they must not be disposed of with regular household waste and need to be taken instead to an appropriate collection point.
